Zebra TLP 2844 Thermal printer

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 28. March 2008 at 18:09 #1079
    AvatarJBailey
    Member
    • Total Post: 24
    • Regular Joe
    • ★★

    I have isntalled JetCetCE for my V10’s pushed through the FTP, isntalls JetCet fine.

    However, I cannot get them to print. I have the terminal setup to be a “network printer” but connected locally through the term, using it as a print server obviously.

    I set the JetCet to Generic Post Script function but nothing. There is no option in Jetcet for this.

    What would my next step be?

    EDIT:Looks like I put this in the wrong section. Mod please move, Sorry.

    28. March 2008 at 20:55 #12359
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi,

    Just to confirm, are you using a V30L?

    Also can you provide more detail, you want to set up one terminal that has a USB printer plugged into it as a print server for other CE terminals to print to?

    Thanks for the additional info, I will move this thread to the CE section once you have replied,

    Cheers,
    -TT

    31. March 2008 at 17:34 #12385
    AvatarJBailey
    Member
    • Total Post: 24
    • Regular Joe
    • ★★

    I figured it out, I had the wrong port set. I was using Parallel to USB w/JetCet and had it on LPT1 not 2

    All is well.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.