Xenith MAC ini file

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #6496
    Avatarp0opap0o
    Member
    • Total Post: 37
    • Frequent Flyer
    • ★★★

    Does anyone know if I can configure the Xenith to work through a MAC.ini file so that I could have multiple configurations? I know the V10L you need to add Include=$mac.ini and put all the MAC.ini files in the inc folder. I tried this with Xenith but it didn’t work.
    Thank you,
    -AW

    #20174
    ConfGenConfGen
    Keymaster
    • Total Post: 11109
    • Jedi Master
    • ★★★★★★★

    Have you checked the ftp server log to verify if there is some trying from the Xenith unit?
    Any messages on the Xenith?

    CG

    #20190
    Avatarp0opap0o
    Member
    • Total Post: 37
    • Frequent Flyer
    • ★★★

    I was able to get it to work by doing a G key reset. The issue is still that when i remove the mac.ini file it takes on the xen.ini file. But when I re add the mac.ini file the only way it grabs the new configs is through a G key reset.
    Makes sense?
    Any thoughts?
    Thank you,
    -AW

    #20197
    ConfGenConfGen
    Keymaster
    • Total Post: 11109
    • Jedi Master
    • ★★★★★★★

    Does not make sense at all to me.
    Any clues in the FTP log?

    CG

    #20210
    Avatarp0opap0o
    Member
    • Total Post: 37
    • Frequent Flyer
    • ★★★

    This is whats in the FTP logs when I boot the Xenith without the G key reset. I dont see any issues here.
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1168]USER anonymous 331 0 0 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1168]PASS -guest@wyse.com 230 0 0 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1168]sent /wyse/wnos/xen.ini 226 0 2290 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1169]USER anonymous 331 0 0 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1169]PASS -guest@wyse.com 230 0 0 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1169]sent /wyse/wnos/inc/0080649237d2.ini 226 0 2216 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1170]USER anonymous 331 0 0 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1170]PASS -guest@wyse.com 230 0 0 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1170]sent /wyse/wnos/C00_xen 426 64 131072 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1171]USER anonymous 331 0 0 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1171]PASS -guest@wyse.com 230 0 0 0
    2011-03-14 15:54:31 xxx.xxx.xxx.xxx [1171]sent /wyse/wnos/C10_bios.bin 550 2 0 0
    This is my XEN.INI file:
    Include=$mac.ini
    ;*************************************************************
    ;* *
    ;* This xen.ini file was generated with the *
    ;* Configuration File Generator 6.0.07 *
    ;* Copyright by Thomas Moellerbernd *
    ;* *
    ;* http://www.technicalhelp.de *
    ;* *
    ;*************************************************************

    ;*************************************************************
    ;* General 1 *
    ;*************************************************************

    autoload=2
    Fileserver=xxx.xxx.xxx.xxx
    Rapportserver=xxx.xxx.xxx.xxx
    AdminMode=yes Admin-Username=xxxxxxxxxxxxxxx Admin-Password=xxxxxxxxxxxxxxx
    Privilege=None

    ;*************************************************************
    ;* Display *
    ;*************************************************************

    Screen=1 Resolution=1280×1024 Refresh=75
    Screen=2 Resolution=1280×1024 Refresh=75
    DesktopColorDepth=32
    Dualhead=yes Mainscreen=2

    Device=vusb Type=HDX

    ;*************************************************************
    ;* Time *
    ;*************************************************************

    Timeserver=xxx.xxx.xxx.xxx Timeformat=”12-hour format” Dateformat=mm/dd/yyyy
    TimeZone=’GMT – 05:00′ ManualOverride=yes Daylight=yes Start=030207 End=110107 TimeZoneName=”US Eastern Standard Time” DayLightName=”US Eastern Daylight Time”

    ;*************************************************************
    ;* Network *
    ;*************************************************************

    SignOn=Yes
    DisableDomain=yes
    DomainList=genpro
    MaxVNCD=1
    VncPrompt=No Accept=5

    ;*************************************************************
    ;* ICA *
    ;*************************************************************

    PnliteServer=xxx.xxx.xxx.xxx
    SessionConfig=ICA BranchRepeater=yes

    MAC.INI file:

    ;*************************************************************
    ;* *
    ;* This xen.ini file was generated with the *
    ;* Configuration File Generator 6.0.07 *
    ;* Copyright by Thomas Moellerbernd *
    ;* *
    ;* http://www.technicalhelp.de *
    ;* *
    ;*************************************************************

    ;*************************************************************
    ;* General 1 *
    ;*************************************************************

    autoload=2
    Fileserver=xxx.xxx.xxx.xxx
    Rapportserver=xxx.xxx.xxx.xxx
    AdminMode=yes Admin-Username=xxxxxxxxxxxxxx Admin-Password=xxxxxxxxxxxxxxxxx
    Privilege=None

    ;*************************************************************
    ;* Display *
    ;*************************************************************

    Screen=1 Resolution=1280×1024 Refresh=75
    DesktopColorDepth=32

    Device=vusb Type=HDX

    ;*************************************************************
    ;* Time *
    ;*************************************************************

    Timeserver=172.16.110.49 Timeformat=”12-hour format” Dateformat=mm/dd/yyyy
    TimeZone=’GMT – 05:00′ ManualOverride=yes Daylight=yes Start=030207 End=110107 TimeZoneName=”US Eastern Standard Time” DayLightName=”US Eastern Daylight Time”

    ;*************************************************************
    ;* Network *
    ;*************************************************************

    SignOn=Yes
    DisableDomain=yes
    DomainList=genpro
    MaxVNCD=1
    VncPrompt=No Accept=5

    ;*************************************************************
    ;* ICA *
    ;*************************************************************
    PnliteServer=xxx.xxx.xxx.xxx
    SessionConfig=ICA BranchRepeater=yes

    Exit=all
    Thank you,
    -AW

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.