Wyse V10L running 7_113 and printing through Citrix XenApp

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #6839
    nschlip
    Member
    • Total Post: 22
    • Regular Joe
    • ★★

    Ok, so the subject explains what I am running and what I want to do. I have four Citrix servers in a cluster, and a PNAgent server. How do I configure my V10L to be able to print from a Citrix Application? For example, if I have Adobe Reader open (it is published on our Citrix servers) and wish to print the document, how do I set that up in my wnos.ini file?

    Here is my config at the moment:

    ;*************************************************************
    ;* *
    ;* This wnos.ini file was generated with the *
    ;* Configuration File Generator 6.0.011 *
    ;* Copyright by Thomas Moellerbernd *
    ;* *
    ;* http://www.technicalhelp.de *
    ;* *
    ;*************************************************************

    ;*************************************************************
    ;* General 1 *
    ;*************************************************************

    autoload=1
    AdminMode=yes Admin-Username=OECFONCBOKCGPACBPGDCODCJPO Admin-Password=PABJIMHPOJCPOCDNMP
    Privilege=None ShowDisplaySettings=Yes
    EnableCacheIni=yes

    ;*************************************************************
    ;* General 2 *
    ;*************************************************************

    FastDisconnect=yes
    FastDisconnectKey=pause/break
    Inactive=30

    ;*************************************************************
    ;* General 3 *
    ;*************************************************************

    Autopower=yes
    SysMode=VDI

    ;*************************************************************
    ;* Time *
    ;*************************************************************

    Timeserver=tilvsvrdc01 Timeformat=”12-hour format” Dateformat=mm/dd/yyyy
    TimeZone=’GMT – 08:00′ ManualOverride=yes Daylight=yes Start=030207 End=110107 TimeZoneName=”Pacific Standard Time” DayLightName=”Pacific Daylight Time”

    ;*************************************************************
    ;* Network *
    ;*************************************************************

    Device=Ethernet Speed=”Auto”
    SignOn=Yes EnableOK=Yes DisableGuest=yes
    DisableDomain=yes
    DomainList=”XYZ”
    MaxVNCD=1
    VncPassword=”PABJIMHPOJCPOCDNMP” Encrypt=yes
    VncPrompt=Yes Accept=10 ActiveVisible=yes

    ;*************************************************************
    ;* Printing *
    ;*************************************************************

    ;*************************************************************
    ;* General Session *
    ;*************************************************************

    SessionConfig=ALL UnmapPrinters=no UnmapSerials=no Smartcards=yes MapDisks=yes

    ;*************************************************************
    ;* ICA *
    ;*************************************************************

    FixLicense=clean
    PnliteServer=tilxxxxxx

    ;*************************************************************
    ;* RDP *
    ;*************************************************************

    SessionConfig=RDP EnableNLA=no

    ;


    ;- RDP Session 1 –
    ;- Each line but the last must end with a ” –
    ;



    CONNECT=RDP
    Description=”Remote Desktop”
    Icon=Remote Desktop
    Colors=true
    Domainname=XYZ
    LocalCopy=yes

    #21021
    ConfGen
    Keymaster
    • Total Post: 11485
    • Jedi Master
    • ★★★★★★★

    First of all: REMOVE the Fixlicense=clean parameter or each device will pull a new temporary TSCAL on each reboot.
    Second: What printers are you using? Local, network, SMB, LPD, ThinPrint,…?

    CG

    #21026
    nschlip
    Member
    • Total Post: 22
    • Regular Joe
    • ★★

    I put the Fixlicense=clean there because none of the clients could connect to a Citrix session. Is it bad to leave it there? I’ve been meaning to ask about that as well but forgot about it. I will go ahead and remove that string for now.

    As for printers, they are network. I was able to get printing to work over RDP by setting up a printer under SMB, but it will not map in a Citrix application.

    #21027
    nschlip
    Member
    • Total Post: 22
    • Regular Joe
    • ★★

    Here is a printing config I use for a different set of V10L’s….

    ;*************************************************************
    ;* Printing *
    ;*************************************************************

    Printer=SMB1 LocalName=”ERC-P4015N” Host=XYZPrint Name=”ERC-P4015N” PrinterID=”HP Universal Printing PCL 6 (v5.2)” Enabled=yes
    DefaultPrinter=SMB1

    #21029
    ConfGen
    Keymaster
    • Total Post: 11485
    • Jedi Master
    • ★★★★★★★

    If you using network printers, you should map them in the users login script and leave WTOS untouched.

    CG

    #21030
    nschlip
    Member
    • Total Post: 22
    • Regular Joe
    • ★★

    Do you mean the script that runs when a user logs into a computer? We have our Citrix servers setup to only map locally attached printers (it see’s the network printers as local printers), but it won’t add a printer to a users Citrix profile. After the user disconnects from the Citrix session the printers that it mapped are also disconnected.

    #21032
    nschlip
    Member
    • Total Post: 22
    • Regular Joe
    • ★★

    I think I figured it out. The print server has the Sharp MX2600 driver, but our Citrix server cluster has the Citrix Universal Print driver – So I need to install the same driver on both to have this work correctly?

    #21037
    ConfGen
    Keymaster
    • Total Post: 11485
    • Jedi Master
    • ★★★★★★★

    Or you need a printer mapping on the Citrix server.

    CG

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.