WDM Device Config

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1346
    Avatarxxxomxxx
    Member
    • Total Post: 2
    • Newbie

    Hi all

    i am new to wdm/wyse thinclients. I downloaded the Config Generator and a Configuration Example including the Folder Structure Template for Certificate and Background deposits, but i dont know how i can package the result into a device configuration, that i can push to my LinuxV6 Thin Clients…

    I pulled a configuration from my Thin Client to the WDM, but that is a *.conf file…

    thx for any advice

    #13543
    ConfGenConfGen
    Keymaster
    • Total Post: 11109
    • Jedi Master
    • ★★★★★★★

    Hi,

    you are talking about two different ways to setup Wyse Linux clients.

    1. Configure one “master” locally and use WDM to pull the config afterwards. This will result in a WDM package based on a pull.conf file. This package can then be pushed to hundreds of other Linux clients. Make sure the target unit run the same firmware level.

    2. Use a wlx.ini file with all settings. You can use the Configuration Generator to create the wlx.ini file you want to have. After generating this file you should copy it to ftprootwysewlx. Now configure your DHCP server to send out option tag 161, which is the IP address of your FTP server, to all clients (refer the Linux admin guide on how to do that) and reboot all target clients.

    I would strongly recommend the second way to go as long as you want to use the same settings on all client. Tell us if this is not the truth and we try to show you ways around this “limitation by design”.

    CG

    #13548
    Avatarxxxomxxx
    Member
    • Total Post: 2
    • Newbie

    hi CG

    thx for the explanation I will use the WDM for inventory and major image distribution and the ini via FTP for the configuration…

    thx again..

    Cobra

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.