WDM 4.9.1 w/ C10LE Fail to Check In

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #7905
    Avatarpionessaw
    Member
    • Total Post: 5
    • Newbie

    I run WDM 4.9.1 with several C10LE clients, only about 5% of the clients “check-in”. The others show nothing in the Last Checkin column. What could be the difference in these? All are configured the same with WNOS.

    #24012
    ConfGenConfGen
    Keymaster
    • Total Post: 9813
    • Jedi Master
    • ★★★★★★★

    What firmware version?
    Post the wnos.ini?
    Are you using DHCP option 186 and 192 to assign the WDM server address to the clients?

    CG

    #24017
    Avatarpionessaw
    Member
    • Total Post: 5
    • Newbie

    7.1_122
    I am not using DHCP option tags – i’m not sure how to do this
    Right now I have to boot up the thin client and manually enter the WDM server the first time…

    autoload=2
    Privilege=High

    Device=audio mic_mute=1

    Autopower=yes

    Language=Us
    Screen=1 Resolution=1280×1024 Refresh=60
    Screensaver=”0″ LockTerminal=no

    Timeserver=10.202.62.13 Timeformat=”12-hour format” Dateformat=mm/dd/yyyy GetBiosDT=no
    TimeZone=’GMT – 05:00′ ManualOverride=yes Daylight=yes Start=030507 End=100507 TimeZoneName=”US Eastern Standard Time” DayLightName=”US Eastern Daylight Time”

    ;Device=Ethernet Speed=”Auto”
    SignOn=No
    MaxVNCD=1
    VncPrompt=No Accept=5
    VncPassword=XXXXXX

    Include=$MAC.ini

    ================================

    This is the MAC.ini

    TerminalName=XXXXXX Reboot=yes

    SignOn=No

    CONNECT=RDP
    Host=xxxxx
    Description=”XXXXX”
    AutoConnect=Yes
    Reconnect=15
    Fullscreen=yes
    Resolution=1024×768
    Username=xxxxxx
    Password-enc=OICFKBCHMEDFNNEKKMGKPKBDPCGOKMHN
    Domainname=na
    LocalCopy=no

    #24024
    ConfGenConfGen
    Keymaster
    • Total Post: 9813
    • Jedi Master
    • ★★★★★★★

    I would heighly recommend to use DHCP option tags.
    Check out me “First steps” document in the “Products-Thin OS” section to find out how to do this.

    CG

    #24025
    Avatarpionessaw
    Member
    • Total Post: 5
    • Newbie

    We prefer to use static IP addresses at my facility because of the lac of DHCP addresses available, is it possible to put the static IP’s in the MAC.ini or something?

    #24029
    ConfGenConfGen
    Keymaster
    • Total Post: 9813
    • Jedi Master
    • ★★★★★★★

    Yes, put RapportServer=IP or the equivalent WDMServer=IP in your wnos.ini.

    CG

    #24030
    Avatarpionessaw
    Member
    • Total Post: 5
    • Newbie

    No I mean like static IP address for each thin client, rather than using DHCP. All our clients have static addresses assigned in DNS, which I currently configured the first time I boot up, is there a way to assign those addresses to each client

    #24048
    ConfGenConfGen
    Keymaster
    • Total Post: 9813
    • Jedi Master
    • ★★★★★★★

    Yes, manually on each client.

    CG

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.