WDM 4.8.5 not working with Xenith

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 13, 2012 at 6:56 am #7121
    rapid
    Member
    • Total Post: 3
    • Newbie
    • ★

    Hi,

    I’m testing on WDM 4.8.5(installed on Win 7 m/c) with Wyse xenith. the client was detected by the WDM but I am not able to shutdown, reboot the unit. I’m able to remote shadow the unit.

    any ideas to resolve this issue?

    regards

    February 13, 2012 at 11:40 am #21793
    ConfGen
    Keymaster
    • Total Post: 10696
    • Jedi Master
    • ★★★★★★★

    How was the client detected?

    CG

    May 24, 2012 at 4:11 pm #22402
    feffrey
    Member
    • Total Post: 2
    • Newbie
    • ★

    I am having a similar issue, client is detected via dhcp.
    When I issue a command, it shows up in the real time commands, but does not get applied to the client. Occasional it will apply the commands, but it can take several minutes. Other times they never apply.

    May 25, 2012 at 7:10 am #22405
    ConfGen
    Keymaster
    • Total Post: 10696
    • Jedi Master
    • ★★★★★★★

    What firmware is running on the unit? If it is the latest 1.7_122 then you do need WDM 4.9.1 to get it to work.

    CG

    May 25, 2012 at 1:15 pm #22410
    feffrey
    Member
    • Total Post: 2
    • Newbie
    • ★

    sorry, I should have mentioned that before.
    WDM 4.9.1
    Firmware 1.7_037

    Edit: firmware update fixed it, it is running commands instantly now.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.