WDM 4.5.1 does not support VX0 Dual Video Device

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #289
    Avatarenam
    Member
    • Total Post: 145
    • Legend in Own LunchBox
    • ★★★★★

    Hi,

    I am using the new version of WDM 4.5.1 and was trying to pull the VX0 Dual Video Thin Client image through it. WDM prompted me error “FAILURE (OR NO ARCHIVE)”, WDM 4.5.1 does not fully support the VX0 DV Thin Client.
    If you have any Hotfix for WDM 4.5.1 which will support VX0 DV Client, so give me the link of it.

    Regards,
    Enam

    #9089
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi Enam,

    I have not tested a new V Dual with WDM 4.5.1 and I would have expected full support. Let me do some testing and see what I come up with,

    Cheers,
    -TT

    #9098
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Quick update – I tested WDM 4.5.1 with a V90 dual video and it imaged without any problems.

    Have a look in you intetpub/ftproot/rapport/tools/sa for the VL products and make sure all the .i2c and .i2d files are there,

    Cheers,
    -TT

    #9140
    Avatarenam
    Member
    • Total Post: 145
    • Legend in Own LunchBox
    • ★★★★★

    Hi,

    Thanks for your given me update, In future i will be need your further assistance. I will check to reflash again the VX0 Dual Video Thin Client using WDM 4.5.1.
    I successed to pull the VX0 Dual Video Thin Client image using WSI version 1.1.5. Your Tech Docs named “Creating Images with Wyse Simple Imager” helped me to create image.
    I will use the WSI 1.1.5 VX0 DV Device templete for WDM 4.5.1, I hope it will give me success.

    Cheers,
    Enam

    #9191
    Avatarenam
    Member
    • Total Post: 145
    • Legend in Own LunchBox
    • ★★★★★

    Hi,

    Now my WDM 4.5.1 is working for VX0 Dual Video device using WSI 1.1.5 device script. Now I can get all the VX0 Dual Video device image. 🙂

    Cheers,
    Enam

    #9203
    Avatarkaraziel
    Member
    • Total Post: 74
    • Back Stage Pass
    • ★★★★

    In the folder for the VL (9V92) for XPe there are a couple of .i2c files (push and pull)

    Depending on what command you are trying to accomplish, try opening the .i2c with notepad and modifying the =YES to =NO

    The pull.i2c would be the same but with PULL_HOSTNAME

    I’ve had success with this when the hostname.arc gets corrupt or is missing.

    -k

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.