V10L Speed issues

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #1190
    Avatarkelevra
    Member
    • Total Post: 4
    • Newbie

    Hi Guys,

    Hope you can help/point me in the right direction

    Have rolled out about 14 Wyse thins currently all using dual 19″ Monitors.

    Ever since putting them into the enviroment users are complaining about loss of performance on the HP thins we already have in the business and on the Wyse terminals.

    All thins connect into a virtual 2003 TS enviroment running PMF Software.

    I have been told there is a way to run a trace from the Wyse terminal to report on Bandwidth/Performance?

    Is there a way to view this or do i need to raise an issue with Wyse?

    Any help greatly appreciated.

    Thanks

    #12931
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi,

    The “trace” you are after is a network capture which you can do with WireShark.

    Now to your issue, if you are seeing this issue on all clients I would look server side. It could be a load issue as you added 14 extra connections to the environment.

    – Are they all on one server? How many?
    – Is it WAN or LAN?
    – Whats the nature of the issue, intermittent slow down?
    – Have to done any logging on the server?
    – If its WAN what policy mapping do you have?

    Cheers,
    -TT

    #12933
    Avatarkelevra
    Member
    • Total Post: 4
    • Newbie

    Thanks for the rep

    In response to your questions

    – Are they all on one server? How many? No we have a server farm of 32
    – Is it WAN or LAN? WAN
    – Whats the nature of the issue, intermittent slow down? Yes users are remotely intermittent slow down of things.
    – Have to done any logging on the server? We have ran perfmon’s which have shown no issues server side.
    – If its WAN what policy mapping do you have? Each client run’s under the PMF policy.

    The WAN is very large spread across nearly 14 sites.

    However 10 of these thins are going into the same switch.

    #12935
    Avatarakwoolf
    Member
    • Total Post: 8
    • Newbie

    For what is is worth, we have many intermittent issues in my environment, as well. We are using System version 6.1.0_08 and are experiencing random latency issues. Very annoying to users, as we are just going from a PC to an all thin client environment.

    We have been doing much performance monitoring on the server side, and have been monitoring the network, with no ill results noted.

    We have a fairly small Citrix thin client environment that includes 6 servers at a central site that currently serve about 100 thin clients across 5 remote sites. The latency issues happen randomly, and occur regardless of the connected server. These random slowness/latency issues are holding up a larger thin client deployment.

    Does this sound familiar to anyone?

    #12944
    Avatarkelevra
    Member
    • Total Post: 4
    • Newbie

    Hey,

    Can you recommend the best way to run a wireshark scan?

    Does it need to be installed onto a Wyse terminal or can i run it remotely?

    #12946
    Avatarakwoolf
    Member
    • Total Post: 8
    • Newbie

    We usually running an end-to-end scan to test the links between sites. We have a machine located centrally and a machine running remotely.

    #12950
    ConfGenConfGen
    Keymaster
    • Total Post: 11009
    • Jedi Master
    • ★★★★★★★

    Wireshark can run on any machine on the network. If you are using switches you have to mirror the port of the Wyse client or the server to monitor the traffic.

    CG

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.