usbstick mapping probelm

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #330
    Avatarjamal
    Member
    • Total Post: 5
    • Newbie

    hi,
    can anyone solve this problem.
    i have wyse v50 & s50
    when i map usbstick first time its working fine. if i use second time after shutdown it is not working. drive is present but not show the content of drive. drive mapping option is aslo enable from rdp client setting.

    Best Regards
    Jamal

    #9223
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi Jamal,

    What version of firmware are you on? I have used 6.3.1 build 21 under RDP without issue,

    Cheers,
    -TT

    #9226
    Avatarjamal
    Member
    • Total Post: 5
    • Newbie

    Hi,
    First i would like to appiciate you for your quick response!
    Well, I have tested more than one USB Stick device on V50, Version 6.3.1 Build 21. It is working fine. 🙂 I did not check it on S50 yet. Now tell me one more.

    1. Can I use Digital Camera memory device on RDP session using V50,S50 Thin Client as we used the USB Memory Stick on V50,S50 device.

    2. Can I use Multiple Mermory card reader on V50,S50 device using RDP Session.

    Best Regards,
    Jamal

    #9237
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi Jamal,

    I am glad it works now! Its becoming a challenge to keep up with the forums as there are so many posts each day, and many questions I don’t have the answers for!

    – For SD Memory that is used in digital cameras many SD card readers work however do try before you buy 100 of them as some don’t. This is the best way to deal with cameras rather than plugging them in.

    – Yes, you can have more than on USB device, just define a few drive letters for them in the wlx.ini file. The other cool feature is they map as soon as you put the key in. No need to log out first from the RDP session.

    I hope this helps,

    Cheers,
    -TT

    #9673
    AvatarKadenmire
    Member
    • Total Post: 2
    • Newbie

    HI this looked like the right place to post this mabey yall can help. I’m using TAC USB floppy drives with the V50 dual on the Linux6 OS build 6.3.1. What is happining is that when I map the drive using ICA to citrix it shows up in my drive list but says drive is not ready. It only works if I map a USB disc drive as another drive letter and click on that drive. This gets very confusing for my people who are trying to use the floppy. Anybody know a fix for this? Wyse tech support wasn’t much help. 😥

    #9719
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi,

    I am not sure what you mean here – if you set the floppy up as say the D drive it works but not as the A drive?

    Cheers,
    -TT

    #9771
    AvatarKadenmire
    Member
    • Total Post: 2
    • Newbie

    @thinkthin wrote:

    Hi,

    I am not sure what you mean here – if you set the floppy up as say the D drive it works but not as the A drive?

    Cheers,
    -TT

    No if I set a drive as a floppy it dose not work but if I set it up as a disk drive and plug the floppy drive in it works. I have to set it as a disk drive before it will work.

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.