- This topic has 12 replies, 3 voices, and was last updated 8 years ago by
.
-
Posts
-
Folder structure is ok
user setup is ok
firmware is in placeBUT…
When i reboot T10 and it loads his ini file it seems all ok…
it even starts downloading the new firmware but then it stops with error :ERROR ! Invalid file format
Pls help
So wnos.ini loads fine but firmware fails?
Sound like a corrupt firmware file. Where did you get it from?CG
Firmware comes frm Dell/wyse themselfs..
Figured something out..seems to bee FTP issue..
seems to work from “WINDOWS FTP” and not from “LINUX FTP”
anything i need to keep count with ?this i can give you…
Privilege=high ; hydesysinfo=yes hydepc=yes hydeconnectionmanager=yes showdisplaysettings=no EnableNetworkTest=yes enabletrace=yes
EnableGKey=yes
EnableCacheIni=yes
AdminMode=Yes Username=adminWS Password=wyse
Fileserver=ftp:\******** username=**** password=****
rootpath = Rapport/*****/
vncpassword=*****
KeySequence=yes Ctrl+Alt+Up=no Ctrl+Alt+Down=no Ctrl+Alt+Left=no Ctrl+Alt+Right=no Ctrl+Alt+Del=yes
maxvncd=4
sysmode=classic ;vdi
RegisterWINS=yes
vncprompt=yes accept,reject=60 viewonly=no activevisible=yes
DesktopColorDepth=32
Timeserver=ntp.*********.com Timeformat=”24-hour format” Dateformat=dd/mm/yyyy
TimeZone=’GMT + 01:00′ ManualOverride=yes Daylight=yes Start=030507 End=100507 TimeZoneName=”W. Europe Standard Time”
Device=Ethernet Speed=”Auto”
Device=Keyboard numlockoff=no
Device=audio volume=25 mute=0
SessionConfig=ALL DisableSound=0
enablelocal=no hidedefault=yes
sessionconfig=RDP enableNLA=yes
hideip=no
disablebutton=no
AutoLoad=1
AutoPower=yes
service=wdm disable=no
rapportserver=******.be.local retry=5
rapportdisable=no
autosignoff=yes
shutdown=yes
shutdowncount=5
SignOn=no connectionmanager=minimize
inactive=0
screensaver=30 Lockterminal=1 Type=1
Desktop=background.jpg icontextcolor=”255 255 255″
EncryptFS=noLanguage=Nl_be charset=ISO-8859-1
Try removing Rapport/*****/ and adjust your foldre structure.
CG
hi,
What do you mean…
i need to get rid of the full path ?
and just go for servername/wnos ?
instead of servername/Rapport/test/wnos folder structure ?ConfGen.. thx for answer… altoough it was no solution…
C:inetpubftprootwnos
it’s still saying
ERROR !
Invalid File Formatif i check log file it goes checking for it… 🙁
13:02:48 Checking Software ftp:/wnos/fove_boot …Still think that the firmware file is corrupt.
Have you double checked that?CG
Going to check that on monday….
person with account to download firmware is not in.. 🙁must be firmware coz setup new server from scratch and still problem..
anyway MANY thx for your responds and i will post the solution here.. 🙂
I found out that after a firmware update to 8.1_027
server AND path MUST be written on one line…????!!!!!;Fileserver=ftp:\\******* username=*** password=***
;rootpath = Wyse/RDP/becomes
Fileserver=ftp:\\*****/Wyse/RDP/ username=wy*** password=****
anyone with the same problem ?
- You must be logged in to reply to this topic.