S30 – WCE6.0 – VNC no remote shadow

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #7495
    mr-moo
    Member
    • Total Post: 3
    • Newbie

    I’m pretty new to these thin clients. I’ve began managing a company with about 100 of these. They currently have S50’s which are end-of-life.

    I’ve began swapping 2 out with S30s and I’ve noticed a serious issue.. No VNC is installed on them. I cannot find it anywhere. I’ve determined that I’m going to need to download it, and remotely deploy it via WDM from my understanding. Is that correct? If so, does anyone know where I can find it?

    Thanks!

    #22773
    mr-moo
    Member
    • Total Post: 3
    • Newbie

    No one has any advice on this? I really appreciate the help. Wyse has been useless :/

    Thank you

    #22785
    ConfGen
    Keymaster
    • Total Post: 10696
    • Jedi Master
    • ★★★★★★★

    I have uploaded the addon for you

    https://technicalhelp.de/downloads/CE/RemoteShadowb35.zip

    CG

    #22844
    mr-moo
    Member
    • Total Post: 3
    • Newbie

    Fantastic, I got this working by:

    Your WDM FTP server is now configured for use with the Remote Shadow Add-On for the Wyse S30 thin clients. Here’s what you need to do to get it installed:

    – On the s30 thin client click Start > Settings > Control Panel
    – Double-click the Add-on icon
    – Click the Add button
    – Select the “Use Local FTP Information” circle button at the top of the screen then enter the following information:
    o In the Server Name: box – 192.x.x.x
    o In the Server Directory: box – /wyse/wlx/addons
    o In the User ID: box – anonymous
    o In the Password: box : you can enter whatever you want here, mash the keyboard if you want
    – Now click the Upgrade button. Wait for the Warning window to appear and click the Start button. The addon will download and install automatically from the FTP server.
    – Click the Reboot button when prompted
    – Wait for the thin client to reboot
    – In case you need to disable the VNC password click Start > Settings > Control Panel
    – Double click Remote Shadown icon
    – Remove the check mark from the Password Enable box then click the Apply Changes button and wait 10 seconds for the VNC service to be restarted
    – Done

    Need to get the IP of the thin client? Click Start > Settings > Control Panel then double click the System icon then click the System Info tab. The IP is listed in the IP Address: line

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.