S10 – media size

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #1131
    Avatarmikev
    Member
    • Total Post: 157
    • Jacked into The Matrix
    • ★★★★★★

    hi,

    I am using both 1125SE and S10.

    In WDM, the default media size for all 1125SE’s is appearing as 16MB. But for S10’s, the media size is appearing as 0MB. Dont’ know why?

    Can anyone pls advise what is the default media size used for S10’s?

    Also, in my DDC i have configured DDC for 16MB media size for all my 1125SE’s.

    Do i need to configure another DDC for S10’s? – if yes, what media size do i need to use for that?

    Thanks.

    #12647
    ConfGenConfGen
    Keymaster
    • Total Post: 11109
    • Jedi Master
    • ★★★★★★★

    The S10 has only 2MB of something similar to a flash memory. But as it is not a real flash memory you see 0MB in WDM.
    If you want a DDC to S10 liek for 1125 you have to configure either a new DDC for WTOS and 0MB media size or use the parameter “S10WDMFlash=16MB” in a general wnos.ini. This way all S10 will report 16MB of flash to WDM and will work with your 1125 DDC.

    Regards
    CG

    #12669
    Avatarmikev
    Member
    • Total Post: 157
    • Jacked into The Matrix
    • ★★★★★★

    Thanks mate…it works.

    One more question – i have got 10 different subnets and wnos.ini file configured for each subnet as per location.

    Do i need to include the line “S10WDMFlash=16MB” in each wnos.ini file? – because i have got S10’s installed in each sunbet and want them to point to the correct ini file as per location just like how 1125 does at the moment.

    thanks.

    #12671
    ConfGenConfGen
    Keymaster
    • Total Post: 11109
    • Jedi Master
    • ★★★★★★★

    Each S10 has to get the information S10WDMFlash=16MB once. No matter how you achieve that. After that they will report 16MB of flash as long as they did not get any different setting (like S10WDMFlash=32MB or similar)

    CG

    #12675
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi,

    I would set up a default wnos.ini in your inetpubrapportwnos folder (check WDM to see where the Rapport INI locations set) and set the S10WDMFlash=16MB in there.

    – New S10 checks in to WDM with flash=0, there is no DDC so the device goes to the default location.

    – It reads the wnos.ini with the S10WDMFlash=16MB and on next boot it now will have a DDC job to match it.

    In this way you only have to change one file and leave all your 10 DDC jobs as they are!

    Cheers,
    -TT

    #12678
    Avatarmikev
    Member
    • Total Post: 157
    • Jacked into The Matrix
    • ★★★★★★

    Thanks guys. This is working great. Thanks again.

    Do the same logic apply for V10’s as well? – reckon flash size is 128MB.

    #12683
    ConfGenConfGen
    Keymaster
    • Total Post: 11109
    • Jedi Master
    • ★★★★★★★

    No, this parameter is for S-Class only.
    V10L has always 128MB flash. There are no other models available.

    CG

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.