netXfer dhcp options?

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #1475
    • Total Post: 3
    • Newbie

    Is there any way to conifigure any dhcp options for netXfer?

    I do believe netXfer uses a built-in dhcp server. I need to configure an option #161 for upgrading some WT3235LE from CE to Blaze OS.

    Is this possible to set dhcp option’s for use of netXfer.

    • Total Post: 10966
    • Jedi Master
    • ★★★★★★★

    No, netXfer does not support any DHCP option tags.


    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★


    This is how I do it:

    1/ Set up your DHCP server scope to respond to bootp requests. On Windows this is a tick box option.
    2/ Set up the Option tags 66 and 67. 66 it the IP address of the TFTP server and 67 is the file name.
    3/ Download TFTP32 and run this with the binary file in the TFTP directory
    4/ Boot the unit with the “Q” key, this starts a bootp boot. In the Rapport, CE downloads on this site there are files to remotely start this process of rather than having to press the key.

    So that’s how I have done it, and I have converted 1000’s remotely this way. One other issue to be aware of, if you find the 3235 does not convert correctly or will not convert there are some units with bad BIOS chips (NOR). Open the case, remote the daughter board and look at the NOR – the AMTEL ones are the ones with issues. Only option is to buy a replacement,

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.