Installed certificate not working

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #7099
    scifidale
    Member
    • Total Post: 4
    • Newbie

    Hi all,

    I have a xenapp 6 fundamentals installation that I would like remote sites to be able to connect too over the WI. I also have a custom SSL certificate that the s10’s do not natively know so I have added the addcertificate option into the wnos.ini. The certificate I exported directly from the xenapp server but when I try and open xenapp from our s10’s I still get the connection refused message and in the logs it saying it cannot find a certificate to trust even though it also says that it has installed to flash the certificate I’ve exported.

    I was wondering because this is a custom certificate is there an option that I have to set to get the s10’s to trust the certificate as well as install them at all?

    I’ve attached portions of the wnos file to this post just to see if anyone can spot anything glaringly obvious. Thank you in advance.

    Desktop=wallpaper.jpg

    SignOn=No

    addcertificate=citrix.crt

    CONNECT=ICA
    BrowserIP=https://remote.company.com
    Application=”companyTS”
    Description=”companyTS”
    Icon=default
    Fullscreen=yes
    Logon_Mode=user-specified
    HTTPBrowsing=yes
    LocalCopy=no

    #21740
    ConfGen
    Keymaster
    • Total Post: 11485
    • Jedi Master
    • ★★★★★★★

    Everything looks fine. But how long is your certificate encryption? Is it more than 2048? This would not be supported.

    CG

    #21777
    scifidale
    Member
    • Total Post: 4
    • Newbie

    The certificate is 2048bit so that shouldn’t be a problem. i’ll have to do a bit more fiddling i guess. Typically this has been overtaken by more pressing matters, so I will have to have another look next week.

    #23802
    karmakoma
    Member
    • Total Post: 73
    • Back Stage Pass
    • ★★★★

    Hi, I know this is an old post but i wonder if you managed to get this working.

    I have a self created certificate trusted by our internal domain certificate authority server. This certificate is for for Citrix Single Sign On Account self service.
    I have configured the wnos.ini for our Wyse C10LE running WTOS 7.1_122 to load the certificate.

    The client successfully loads the certificate but when I go to account self service, request a password reset and enter my login credentials and domain I receive an “SSL UNKNOWN CERTIFICATE AUTHORITY” error.

    I have confirmed the Password server address matches the certificate. I have also confirmed this certificate works on a PC on our domain.

    Does the Certificate Authority need to be a particular trusted CA for WTOS?

    Attached is the relevant parts of my wnos.ini

    ;*************************************************************
    ;* General 3 *
    ;*************************************************************

    NoticeFile=disclaimer.txt Resizable=yes
    Autopower=yes
    AutoSignoff=yes Reboot=yes
    AddCertificate=Citrix_SSO Password=*******
    SysMode=Classic

    ;*************************************************************
    ;* Network *
    ;*************************************************************

    SignOn=Yes
    DomainList=”AP,IB,CORP,IAM,POIS,PVB,SECURITIES,UK,ZA”
    PasswordServer=password.investec.com
    AccountSelfService=yes

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.