Hserver – WNOS.ini

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #561
    Avatarpdoggi
    Member
    • Total Post: 3
    • Newbie

    I have a very simple wnos.ini that is working once I figured out what I needed to do to set up.

    Here is the question/frustration that I am experiencing. Every time a device boots up it gets to the “Contacting Hserver….” message and it takes probably 90 seconds to get booted up.

    This happens EVERY time, so no matter if I update the configuration or not it goes through this process. Is this normal behavior that I just need to accept or is something misconfigured?

    Any suggestions would be greatly appreciated. Below is my sample test wnos.ini that I am using.

    thanks,

    Peter

    ;*************************************************************
    ;* *
    ;* This wnos.ini file was generated with the *
    ;* Configuration File Generator *
    ;* Copyright by Thomas Moellerbernd *
    ;* *
    ;*************************************************************

    ;*************************************************************
    ;* Display *
    ;*************************************************************

    Resolution=1024×768
    DesktopColorDepth=32
    Screensaver=”1″ LockTerminal=no Type=1

    ;*************************************************************
    ;* Network *
    ;*************************************************************

    SignOn=No
    MaxVNCD=1
    VncPassword=”xxxxxxx”

    ;*************************************************************
    ;* ICA *
    ;*************************************************************

    ;


    ;- ICA Session 1 –
    ;- Each line but the last must end with a ‘ ‘ –
    ;



    CONNECT=ICA
    Host=test-citrix
    Icon=default
    Application=”desktop”
    Description=”Sunwest Standard Desktop”
    AutoConnect=yes
    ;Reconnect=yes
    Encryption=Basic
    Domainname=accounting
    LocalCopy=no

    #10022
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi,

    The “Hserver” is the WDM server – if you do not have one of these on the network do not use a 186 tag and make sure the Rapport/WDM server field under the Network Setup-Servers tab is empty.

    Your device is trying to contact a WDM server and can not connect to it which is why it pauses on this step,

    Cheers,
    -TT

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.