- This topic is empty.
-
Posts
-
Hi,
Did anyone test the HP LaserJet P1000 Series printer on S10/V10L device with Windows 2003 Terminal Server envoirnment.
I have tested it on both the device S10 and V10L but printer is not working in Windows 2003 TS Session.
When I print the job only Printer LED blinks 3 or 4 times and Session hangedup untill I restart the TC and reboot it again.
Following was the Firmware version
S10 : 6.2.0_08
V10L : 6.2.0_08
Pinter : HP LaserJet P1006
Windows : Windows 2003 SP2 R2Regards,
EnamHi,
the 1006 is currently not working on WTOS. You would have to request this by Wyse.
Only 1000, 1005, 1018 and 1020 are working.CG
Hi,
I also test the P1005 Printer… P1005, and P1006 both has same issue.
If you have tested the P1005 printer so plz tell me the procedure that how I can configure it.
Regards,
EnamUse ConfGen-Printer tab and mark the checkbox for 1xxx series HP printers.
CG
Hi,
Without WNOS configuration can I configure the printer.
Regards,
Enamif you check this box ConfGen will create an additional folder called “printer_fw” for you. In this folder you will find some HP firmware files that are needed by you printers. Just try it and check the bubblehelp inside ConfGen for this checkbox.
HP 1xxx series printers are low cost, firmware-less printers that need to get the firmware from the host OS.
CG
Hi,
Oh!!! Which we use for HP LaserJet 1020 Priner…???
I remember we use sihp1020.dl file into printer_fw folder for HP 1020 printer.
Regards,
EnamI have implemented suipport for 1000, 1005, 1018 and 1020 through the same checkbox.
CG
Hi,
Yah, I have seen the sihp* files with the confgen tool. I will try to configure the printer tomorrow.
Thanks for the advise.
Regards,
EnamHi CG,
I have tried but printer in not working for me.
Following was the step by step configuration to setup the HP LaserJet P1005 printer on S10 device.Make “wysewnosprinter_fw” Folder into ftproot directory.
Make “wnos.ini” file into “wnos” directory.
Copy “sihp1005.dl” file form “confgen” directory to “printer_fw” directory.WNOS.INI Parameters.
AutoLoad=1
SignOn=0
FileServer=xxx.xxx.xxx.xxx
RootPath=/wyse
Privilege=High
PrinterMap=sihp1005.dl
Printer=LPT1 Name=”hp1005″ PrinterID=”HP LaserJet P1005″ Enabled=yes EnableLPD=yes
CONNECT=RDP Host=xxx.xxx.xxx.xxx Description=”Remote” AutoConnect=0 Colors=true Fullscreen=yes Domainname=NCOMPUTING
Behavior is same like before, Printer LED only blinks and blinks but no printing.Regards,
EnamPrintermap parameter is obsolete.
Can you check with a ork trace that the printer is really pulling the .dl file?CG
Hi,
I can send you IIS-FTP Log.
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2009-01-06 05:26:31
#Fields: time c-ip cs-method cs-uri-stem sc-status sc-win32-status
05:26:31 132.157.160.143 [1]USER anonymous 331 0
05:26:31 132.157.160.143 [1]PASS [email protected] 230 0
05:26:31 132.157.160.143 [1]sent /wyse/wnos/wnos.ini 226 0
05:26:31 132.157.160.143 [2]USER anonymous 331 0
05:26:31 132.157.160.143 [2]PASS [email protected] 230 0
05:26:31 132.157.160.143 [2]sent /wyse/wnos/sihp1005.dl 226 0
05:26:31 132.157.160.143 [3]USER anonymous 331 0
05:26:31 132.157.160.143 [3]PASS [email protected] 230 0
05:26:31 132.157.160.143 [3]sent /wyse/wnos/VL10_wnos 550 2
05:26:31 132.157.160.143 [4]USER anonymous 331 0
05:26:31 132.157.160.143 [4]PASS [email protected] 230 0
05:26:31 132.157.160.143 [4]sent /wyse/wnos/VL10_bios.bin 550 2Regards,
Enam
- You must be logged in to reply to this topic.