- This topic is empty.
20. March 2008 at 14:39 #1055RichmondMember
- Total Post: 5
I have been asked to fix two WYSE WT3125SE terminals where they are both suddenly coming up with the error
“The terminal’s flash file system has been corrupted. Normally this can be corrected by reloading the terminal’s firmware.”
As wyse in the uk don’t have a tech support telephone line 👿 can any of you offer some suggestions?
If I recall correctly on other terminals from other companies we have to download some firmware to a flash stick and then stick it in the termal, then press something to make it run on startup from the stick.
Can anyone offer any advice? Like a link to a download and a step by step if poss?20. March 2008 at 21:19 #12290
You will need to use the “Wyse Simple Imager” to flash to unit, you ca find this tool at the bottom of this page:
The firmware is at the top of the page. Make sure you follow the setup guide carefully,
-TT21. March 2008 at 10:44 #12299ConfGenKeymaster
- Total Post: 11110
- Jedi Master
NetXfer is another option. You can download the tool from my website
Download the 3125 firmware from Wyse, take the included .bin file, rename it to bootp.bin and place it in the netxfer folder.
Then follow the steps in the readme.txt.
CG21. March 2008 at 11:57 #12300
opps – sorry I did not read the post (I was thinking 3150) 😳
Yes you will indeed need netXfer, check out the article below for details:
Thanks ConfGen!25. March 2008 at 10:28 #12315RichmondMember
- Total Post: 5
Thanks guys. Downloaded the netxfer software but where can I find the 3125 firmware? The wyse website isn’t the easiest to navigate…25. March 2008 at 21:51 #12319
Check out Support-Downloads – Retired Products on the US wyse.com site,
- You must be logged in to reply to this topic.