DP Audio Shows up after Reboot when Audio Disabled in Bios

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 8, 2019 at 3:45 pm #48561
    lowrider527
    Participant
    • Total Post: 8
    • Newbie
    • ★

    Wyse/Dell 5010

    ThinOS Lite 2.5_020 (Actually does it with 2.3_012 as well)

    Scenario: 1

    Normal Use at Wyse Device Level > Peripherals> Audio> Playback Devices

    Nothing plugged in = HD Audio (Only) As Expected

    Scenario: 2

    Disable Audio in Bios = No Device as Expected (Fields Blank)

    Reboot Device = DP Audio

    Power off Device and boot up = No Device as Expected

     

    So for some reason Reboots make DP Audio Show up.

    Just for Clarity: Always on first Power on No DP Audio

    January 9, 2019 at 10:22 am #48586
    ConfGen
    Keymaster
    • Total Post: 10696
    • Jedi Master
    • ★★★★★★★

    Can you try adding
    Device=audio DPAudio=no
    to your INI file?
    Quite strange as D10 has no Display Port Audio support.

    CG

    January 9, 2019 at 3:03 pm #48592
    lowrider527
    Participant
    • Total Post: 8
    • Newbie
    • ★

    I know it is very Strange no matter what you can never Click the box to enable DP Audio so not sure where it’s coming from and it only shows up after rebooting see picture which shows “Device=audio DPAudio=no”

    DP Audio

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.