Converting a V90 to a V30

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 23. August 2007 at 20:27 #569
    Avatarflyphisher
    Member
    • Total Post: 6
    • Newbie
    • ★

    Anyone know the process of converting a V90 (XPe) to a V30 (Windows CE)? A system engineer from Wyse showed a tech at our location the process at one time and since then the documentation got misplaced. This trick more or less fools the terminal into thinking it is a V30 and allows it to be loaded with a CE image via Rapport. We have several V90s in our mostly CE environment that we’d like to convert over to CE, rather than replace them with V30 or S30 devices if possible. Any direction would be appreciated.

    26. August 2007 at 18:45 #10053
    ConfGenConfGen
    Keymaster
    • Total Post: 11009
    • Jedi Master
    • ★★★★★★★

    you would have to contact Wyse for that. I saw this too and the needed files are not freely available. Also there is possibly a charge for the CE license.

    ConfGen

    16. September 2007 at 7:04 #10222
    Avatarblackmatch
    Member
    • Total Post: 3
    • Newbie
    • ★

    i was digging around on the wyse ftp site and found this, if you still need it.
    ftp://ftp-us.wyse.com/Pub/Support/SYee/conv
    hope this is what you need

    12. October 2007 at 15:03 #10435
    Avatarflyphisher
    Member
    • Total Post: 6
    • Newbie
    • ★

    I did get this process accomplished successfully. I needed to have a Wyse SE come out and take me through the process. There’s a special security file that needs to be obtained from Wyse to get it to work properly. Also, proper licensing needs to be purchased.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.