C50 login question

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #6051
    Anonymous
    Inactive
    • Total Post: 132
    • Legend in Own LunchBox
    • ★★★★★

    Sorry maybe I’ve missed this in the docs but…I checked Thin Client User as auto login user and after that have no chance to login as admin. What and when should I press to get login prompt? Don’t offer G-key please 😀 Thanks.

    #18704
    Anonymous
    Inactive
    • Total Post: 132
    • Legend in Own LunchBox
    • ★★★★★

    One more problem: I decided to make system at least ask Thin User Client password: I made it auto login and set password. Nothing good happened – it still doesn’t ask password but now I can’t reset it to the original state using G-key.

    #18737
    ConfGen
    Keymaster
    • Total Post: 10696
    • Jedi Master
    • ★★★★★★★

    Have you configured this via wlx.ini or locally on the unit?
    If latter you have to do a G-Key reset as there is no delay in autologin like you can configure via wlx.ini.
    Here’s the procedure for g-key reset on R50L with V11.

    1) Reboot and when bios screen shows, hold down the escape key. This should bring up the Grub boot menu.
    2) From the Grub boot menu, choose the 2nd entry down (not the fastboot, which is default)
    3) After the green screen with the progress bar is showing, wait a few seconds and start holding down the g key.
    4) when booting is complete, the permanent registry should be reset to default, and, the admin and thinuser passwords should be reset to default.

    CG

    #18850
    Anonymous
    Inactive
    • Total Post: 132
    • Legend in Own LunchBox
    • ★★★★★

    Thanks, CG! And is there the way (without g-key reset) to get login screen (to login as admin for example) even if autologin user is defined?

    #18856
    ConfGen
    Keymaster
    • Total Post: 10696
    • Jedi Master
    • ★★★★★★★

    If you have a second unit which isn’t configured this way, you could pull the device config nd push it to the “broken” unit.
    Other than this, the answer would be No.

    CG

    #18987
    ConfGen
    Keymaster
    • Total Post: 10696
    • Jedi Master
    • ★★★★★★★

    I am having similar issues – have tried with and without the wireless addon.

    I am running V50L with:
    Version: 6.6.2
    Build: 02
    OS Version: 2.6.16.40

    WYSE USB Wireless Dongle – CCAD06LP1840T7

    With the addon, it appears to be working, but I cannot obtain an IP address. WEP is enabled.

    Without the addon, I receive syslog messages about can’t insert module and failed to load module.

    Any ideas?

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.