[b]ddc not saving wdm 4.5.1 with hot fixes[/b]

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 10. March 2008 at 23:22 #1014
    Avatar12monkeys
    Member
    • Total Post: 7
    • Newbie
    • ★

    hi all,
    we have 80 different subnets and each one contains 5 different ddc’s for each type of device, as we have 8, 16, 32, 64 and 128mb devices and all around australia, therefore in different time zones.
    only difference between each one is the timezone.

    each time we add in the ddc and save and exit, we come back in two days later and they not saved in there. need to re add them in.

    is there a better solution that this.

    Thanks

    11. March 2008 at 3:20 #12086
    Avatardshaun
    Member
    • Total Post: 59
    • Back Stage Pass
    • ★★★★

    Not sure whether this is a solution but it might be a good idea to upgrade your WDM to v4.5.3

    DShaun

    11. March 2008 at 5:28 #12090
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi, the Hot fix roll up should fix this issue on 4.5.1. The roll up is on the wyse.com site,

    Cheers,
    -TT

    11. March 2008 at 19:50 #12111
    ConfGenConfGen
    Keymaster
    • Total Post: 11114
    • Jedi Master
    • ★★★★★★★

    This is a known issue with 4.5.1.
    I would recommend to go to 4.5.3 as this fixes a lot of DDC issues.

    CG

    12. March 2008 at 14:02 #12140
    Avatar12monkeys
    Member
    • Total Post: 7
    • Newbie
    • ★

    hi thanks
    4.5.1 is installed with hot fixes and still occuring
    has 4.5.3 been tested enough???
    any known bugs at the moment, also my licences are compatible with 4.5.3??

    as we have over 1200 devices and the main issue is the terminal loosing its ddc, we have 1200, 1125, 1150 and V10L’s. are apps are publish via citrix PS4.

    thanks for your help

    13. March 2008 at 20:37 #12172
    Avatarthinkthin
    Member
    • Total Post: 1707
    • Jacked into The Matrix
    • ★★★★★★

    Hi,

    Hmm, my bad – I could have sworn that issue was fixed in the hot fix roll up 🙁

    You should be OK with WDM 4.5.3 just make sure you have a good back up of the server as I have seen a few upgrades go pear shaped. So far 4.5.3 is proving to be OK and it corrects a few problems with DDC which has never really worked properly since 4.4.1,

    Cheers,
    -TT

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.